Lantronix ubox software

So you should try this method first before trying other methods as it is easy, seamless, and smooth. If the above method doesn't work for you for some reason, then you can try this method - 2. MemuPlay is simple and easy-to-use software. It is very lightweight compared to Bluestacks. If you face any issues or have any questions, please comment below. Apps Categories Tools. UBox by Maxwell Wang in Tools. Overview Download Problems PC.

More Tools Apps. Isochronous data transfer is typically used for time-dependent applications, such as multimedia streams with synchronised audio and video, where the data must be delivered within specific time constraints.

Isochronous communication is best suited for applications where a steady data stream is more important than accuracy.

A good example is video conferencing, where infrequent small 'blips' in the data stream are tolerable, but long pauses between a transmission and a response are not. Setting up the UBox is straightforward. Rather than require administrators to install drivers on each computer when each UBox is added, its Active Discovery feature automatically loads the software on each computer so that networked USB devices are available for immediate use over a LAN. Once you've installed the driver software, a USB Device Server window displays a list of USB devices currently connected to each UBox on the network, the status of the software connection, and the location UBox name and port on the UBox to which it is attached.

Four network status indicators one green, two amber and one red on the box itself provide instant visual feedback on network status. The UBox includes software to help identify, access, configure, upgrade and secure each unit on the network. This runs in the background allowing USB equipment to be automatically connected to PCs as if they were connected locally. By default, the UBox is in 'multi-user connect mode', with all USB devices shared, but only available to one user at a time.

Before you can use a device, you must connect to it to gain exclusive access. When you are finished using the device, you must disconnect from it before others can use it.

However, an Auto-Connect handles this automatically, connecting to a printer when a user needs to print, then automatically disconnecting when the job is finished, freeing the printer for other users. As the first USB-to-Ethernet device server to support isochronous data transfer, the UBox enables a wider range of USB products to be networked and brings multimedia into the picture. It offers simple plug-and-play operation and does not require special device drivers.

Both have their own settings and configuration options. Connect the other end of the cable to your network. If you do not have a network, you can connect the UBox directly to the Ethernet port on your computer using an Ethernet crossover cable. Once the UBox has power, notice the following:. The UBox's status lights turn on and off. After a few seconds, the lights stop blinking.

Ignore any other status lights for now. You may see red lights on the UBox at this point in the installation. This is normal until you install the UBox software on at least one computer.

The UBox hardware installation is now complete. Please proceed to the UBox software installation instructions. The following instructions are for installing the UBox software for Windows operating systems.

Insert the product CD into your CD drive. The CD should start automatically. If the CD does not auto start, open My Computer , locate and then double-click. Click the UBox Software Installation button to install the application.

Follow the on-screen instructions. Note: During or after the software installation, the Windows New Hardware Wizard may ask you to install software several times. Install the software automatically. If you see an additional prompt regarding logo testing, click Continue Anyway to proceed. You will use this application to configure the UBox. If you get this message, please update your firmware using the on-screen instructions or see Updating the UBox's Firmware on page Note: Initially, the UBox displays as Unnamed.

During configuration, you can assign a name to it. See Overriding Server Network Settings on page Follow the instructions on the screen to complete the uninstall process. Note: These instructions help you connect a USB device e. We recommend that you only connect one USB device at a time. To connect additional devices, repeat these instructions for each device.

A slowly blinking light indicates that your USB device is not currently supported. Please contact Lantronix if a light is blinking slowly. In the example below, UBox 1: 4 means the device is attached to the fourth port of UBox 1. Initially, your UBox location name displays as Unnamed. Review the following information on the USB Devices tab. USB device.

The icon is green for Connect and red for Disconnect. See 6: Changing Local Software Settings. Available status which means that the USB device is ready to be. The status is now Connected. At this point, you can use it as if it were connected directly to your computer.

In this mode, all USB devices are shared in a one-at-a-time mode. Before you can use the device, you must connect to it to gain exclusive access. When you are finished using the device, you must disconnect from it before others can use it. Typically, this information includes:. If you rename the device see Editing Server Settings:. Dedicated: Dedicates the USB device to a specific computer.

If Yes , the user must enter a password to view and update. If Yes , the user must enter a password to access the USB. Note: If the user chooses Remember Password when. See Viewing or. If Yes , automatically connects to your computer when you. When you have finished using your USB device, you must virtually disconnect it from your computer before it is available to everyone else on the network. Open the Lantronix UBox application. Select the USB device and click the Disconnect icon.

The status changes to. If your USB device requires such action when the device is directly connected to your computer, please perform them before clicking the Disconnect icon in the Lantronix UBox software. While this action is not recommended, you can learn more about it in Using Forced Device Disconnect on page For example, some compound devices have two components: a scanner and a printer.

Other compound devices have three components: a printer, a card reader, and an HID device for buttons on the printer. You can use the following methods instead:. Auto Connect: For improved printer sharing, use the Auto Connect feature to automatically connect and disconnect printers.

Forced Device Disconnect: Forcibly disconnect a device that another user has left in use. The UBox System Tray on the Windows taskbar contains icons that enable you to access the following functions quickly and easily:.

The System Tray is in the lower right corner of your screen next to the time. Right-click the UBox application icon.